{"product_id":"chemguard-directattack-class-a-foam-5-gallon-pail","title":"Chemguard DirectAttack Class A Foam 5 Gallon Pail","description":"Description\nDIRECTATTACK foam agent concentrate is a Low-, Medium-, and High-Expansion Foam, Class A fire control foam concentrate formulated from specialty hydrocarbon surfactants, stabilizers, corrosion-inhibitors, and solvents. The foam agent solution has been proven effective on many deep-seated Class A fuel fires, such as tire fires, paper fires, coal fires, structure fires, and wild fires. The foam agent also provides superior cold weather performance.\n\nDIRECTATTACK foam agent concentrate can be proportioned from 0.1% to 1.0% in fresh, brackish, or sea water. When used as a pre-mixed solution, only fresh or potable water should be used if the premix is to be stored over long periods of time. Because of the extremely low proportioning rate, the foam agent concentrate offers outstanding economy in concentrate storage space, cost (compared to conventional 3% and 6% foam agents), and water hauling requirements. For example, a 5 gal (19 L) pail of foam agent concentrate produces 500 gal (1,893 L) of fire control foam agent solution at 1% concentration and produces 5,000 gal (18,927 L) of foam agent solution at 0.1% concentration.\n\nFire suppression mechanisms and characteristics in effect when using DIRECTATTACK foam agent concentrate include:\n\nReduction of the water surface tension provides the foam agent solution with superior wetting and penetrating characteristics. This helps make Class A fuels less combustible and allows the solution to penetrate past the char to help control deep seated fires.\nExtended drain time provides longer surface wetting, reducing the risk of ignition \/ re-ignition.\nCreation of a dense foam blanket which provides an insulating barrier between the fuel and air.\nSuppression of combustible vapors while cooling the fuel.\nForms a brilliant white foam that reflects heat.\nHigh viscosity allows foam to cling to vertical surfaces for increased protection.\nApplicable suppression mechanisms and some properties of DIRECTATTACK foam agent solution depend on the type of foam delivery device used. The foam agent has a reduced environmental signature and does not have any EPA reportable contents.\n\nDIRECTATTACK foam agent includes the following environmental qualities:\n\nFoam agent does not destroy or retard new forest growth.\nFoam agent will not harm fish or wildlife.\nFoam agent is biodegradable in soils, aquatic ecosystems, and sewage treatment facilities.\nApplication\nDIRECTATTACK foam agent fire suppression concentrate is designed specifically for use on Class A fuel fires including wood fires, paper fires, coal fires, structure fires, and rubber fires.\nFoam agent gives the fire fighter suppression capabilities, exposure protection, and increased safety.\nAlthough designed for Class A fires, foam agent can be effective on some Class B flammable liquid fires when applied by Medium-Expansion and High-Expansion devices.\nFoam agent can be used with aspirating and non-aspirating discharge devices, compressed air foam systems (CAFS), or dropped from fixed or rotary wing aircraft.\n\nApprovals and Listings\nThe performance of DIRECTATTACK foam agent concentrate is measured against and\/or is on the approved list of the following:\n\nNFPA 1150: Foam Chemicals for Fire in Class A Fuels.\n\nCanadair Corporation: Approved for use in the CL-215 and CL-415 Aircraft and foam metering systems.\n\nUSDA Forest Service Specification 307a: Fire Suppressant Foam for Wildland Firefighting.\n\nFoaming Properties\nWhen used with fresh, sea, or brackish water at the correct proportioning rate, the expansion will vary depending on the performance characteristics of the foam making equipment.\n\nProportioning\nDIRECTATTACK foam agent concentrate can be proportioned using most conventional proportioning equipment.\n\nStorage and Handling\nDIRECTATTACK foam agent concentrate should be stored in the original packaging supplied (polyethylene drums or pails) or in equipment recommended by the manufacturer as part of the foam system and within the temperature limits specified. The recommended storage temperature for foam agent concentrate is 30 ?F to 120 ?F (?1 ?C to 49 ?C).\n\nIf the product is frozen during storage or transportation, thawing will allow the foam agent concentrate to be used.\n\nCompatibility\nConsult with Johnson Controls before mixing DIRECTATTACK foam agent concentrate with other manufacturer?s products.\n\nMaterials of Construction Compatibility\nTests have been performed with DIRECTATTACK foam agent verifying its compatibility with the steel, stainless steel, yellow brass, magnesium, and aluminum alloys found in aerial and ground-based firefighting equipment. The foam agent is also compatible with standard fire fighter turn out gear and hose material. The standard procedure for flushing with fresh water should be used with all equipment used with foam agent concentrate or foam agent solution.\n\nEnvironmental and Health Information\nBiodegradability Test\n\nThe DIRECTATTACK foam agent concentrate is readily biodegradable\n\nTypical Physiochemical Properties at 77 ?F (25 ?C)\nAppearance\tLight amber clear liquid\nDensity\t1.010 g\/ml ? 0.010\npH\t7.0 - 8.5\nRefractive Index\t1.3660 ? 0.0035\nRefractive Index\t1.3660 ? 0.0035\nFlash point\t\u0026gt; 200 ?F (93.3 ?C)\nPour point\t22 ?F (? 5.5 ?C)\nViscosity\t12 ? 3 centistokes","brand":"My Store","offers":[{"title":"Default Title","offer_id":46171212775581,"sku":"CG-720000","price":121.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/0524\/3805\/files\/f5439821-4794-4d9b-b614-1d54231e2f18.jpg?v=1731610457","url":"https:\/\/14b115-fc.myshopify.com\/products\/chemguard-directattack-class-a-foam-5-gallon-pail","provider":"Firefighter One LLC","version":"1.0","type":"link"}